The high-efficiency, low-energy shrinkage dryer feeds the fabric into the mesh conveyor belt. A bit overfeeding when feeding cloth. The conveyor belt transports the fabric into the drying box. The staggered nozzles on the upper and lower layers spray out hot air. When the wind is sprayed on the surface of the fabric, the fabric is waved. The hot air evaporates the moisture in the fabric, and a small part of the steam is discharged out of the machine. The temperature controller detects the temperature of the exhaust gas to ensure that the system uses energy efficiently. Steam or hot oil can be an indirect heat source, while natural gas or gas can be a direct heat source during drying. The non-contact temperature detector monitors the surface temperature of the fabric to ensure that the fabric will not overheat and use energy efficiently.
https://www.sunwinmachinery.com/
